Clock In & Out

Clock in and out to mark your worked hours accurately against your schedule.

Yasir Ehsan avatar
Written by Yasir Ehsan
Updated over a week ago

Objective

The objective of this tutorial is to show you a detailed overview of clocking in and out using the Time Clock module.

Overview

Access from your: Android device
Applies to: Employees

By clocking in and out you are making sure that you came and worked for the hours you were scheduled for.

Things to know before you begin:

  1. The Time Clock module must be enabled from the Settings module.

  2. If Pre-clock-in is required before the clock-in, the option of pre-clock-in will appear instead of the clock in at your Dashboard.

Clock In & Out

Step 1: Under Time Clock module > Clock section > Either tap I'm on my way tab or Clock In, as shown in Image 1.

Image 1

Step 2: Tap Add tab > Select the options according to your requirement and add the details, as shown in Image 2.

Image 2

Note: Employees will be able to use and have access to the information below according to the settings set by the Manager.

  • Position

  • Remote Site

  • Notes

  • Tips

Step 3: Tap, Take A Break tab to mark your break > Tap Resume
Shift tab to register the end time of your break, as shown in Image 3.

Image 3

Step 4: Tap Clock Out tab once your shift ends, as shown in Image 4.

Image 4

If you have any further queries, please don't hesitate to reach out to us at support@humanity.com.

Did this answer your question?